PacBio Certified Service Provider

University of Washington PacBio Sequencing Services

Please contact us via email ( with any questions.For a consultation and quote, email us at or call +1-206-616-5117.
Please indicate your organism of interest and genome size or amplicon length if known.

Single-molecule, real-time (SMRT) sequencing is a third generation sequencing technology that generates long-read (ten thousand to a hundred thousand bases) length DNA and cDNA sequences. With the PacBio Sequel instrument, we are able to generate high-quality single-molecule consensus sequences of cDNA and amplicons <10 kbp long and contiguous sequence reads of 10-50 kbp length for long-read applications such as de novo whole-genome assembly and structural variant discovery. We are an HHMI-designated Pacific Biosciences (PacBio) Certified Service Provider offering services for library preparation as well as sample sequencing.

We provide library preparations and sequencing for:

  • Large-insert gDNA (20kb+)
  • High Fidelity (HiFi) Template Preparation (12-20kb)
  • BAC-based DNA
  • Purified PCR products
  • Multiplex amplicons. Multiplex up to 96 amplicons.
  • Multiplex small genomes (microbes). Multiplex up to 16 small genomes.*
  • Transcriptome and Isoform sequencing with PacBio’s Iso-Seq protocol. This service includes cDNA generation from total RNA and SMRTbell addition.

*Maximum number of genomes per pool is dependent on expected genome size and desired coverage level.

We currently do not offer services for modified base analysis. Certain types of microbial modified bases can be determined from raw data. Please contact us for more information.

HHMI or UW-affiliated
External Academic or Nonprofit
Industrial or For Profit
Incoming Samples:
Sample QC (per sample/submitted library) $63.21 $75.27 $95.00
Library Preparation:
SMRTbell Library Prep (first sample) $541.45 $644.69 $813.69
Additional Library Prep $193.42 $230.30 $290.67
cDNA Generation from Total RNA $166.55 $198.30 $250.29
Size Selection:
SAGE PippinHT Size Selection $140.57 $167.38 $211.25
SAGE BluePippin Size Selection $179.41 $213.62 $269.62
SAGE ELF Size Fractionation $282.92 $336.87 $425.18
Sequel II SMRT Cell 8M with 15-hour movie (short) $1,750.57 $2,084.37 $2,630.76
Sequel II SMRT Cell 8M with 30-hour movie (long) $1,950.22 $2,322.09 $2,930.79
Sample Quality Check Only:
Agilent Femto Pulse (per run up to 11 samples) $215.90 $257.06 $324.45
Agilent Bioanalyzer (per run up to 11 samples) $65.84 $78.40 $98.95
Sequel II CCS Data Analysis (per SMRT Cell 8M) $259.81 $309.35 $390.44
Non-GUI Analysis $472.91 $563.09 $710.70

*Note: Prices effective 9/1/2021 and subject to change without notice.
**Host institution and HHMI investigators have priority for the sequencing queue.

Additional Computational Support

For Sequel II SMRT cells, we provide the entire raw data folder as a tar.gz file, including the main raw data file in the subreads.bam format. We can also generate filtered subread sequences in FASTA or FASTQ format upon request. We include the following analysis services for specific sequencing project types:

Sequencing project Bioinformatics services
Bacterial genomic DNA and other small genomes <5.5Mbp SMRT Link 10.1 Microbial Assembly pipeline
(one attempt at genome assembly using default parameters)
Amplicons and HiFi Libraries CCS service fee applies
(circular consensus sequence generation with loose or stringent quality filters)
Demultiplexing* Lima
(symmetric or asymmetric barcodes, standard 384 PacBio 16-bp barcode sequences)
Iso-Seq SMRT Link 10.1 Iso-Seq3 Pipeline CCS service fee applies
(standard analysis through cluster and polishing)

*If you would like us to demultiplex your custom barcodes, please specify this on the request form and include your barcode sequences.

HiFi Data collection (25-30X coverage of a human-sized genome)

Services Quantity Prices
Sample QC 1 $75.27
SMRTbell Library Prep 1 $644.69
Additional Prep 1 $230.30
PippinHT Size Selection 1 $167.38
Sequel II 8M SMRT Cell with Long Movie 3 $6,966.27
CCS Data Analysis 3 $928.05
Total $9,011.96

Multiplex Microbe (16 pooled samples, genomic DNA + plasmids)

Services Quantity Prices
Sample QC 16 $1,204.32
SMRTbell Library Prep (first sample) 2 $1,289.38
Additional Prep (samples 2-8) 14 $3,224.20
Sequel II 8M SMRT Cell with Short Movie 1 $2,084.37
Microbial Assembly in SMRTLink v10.1 1 Included
Total $7,802.27

CLR Data collection for Structural Variant Detection (40-50X coverage of a human-sized genome)

Services Quantity Prices
Sample QC 1 $75.27
SMRTbell Library Prep 1 $644.69
BluePippin Size Selection 1 $213.62
Sequel II 8M SMRT Cell with Short Movie 1 $2,084.37
Total $3,017.95

Amplicon Sequencing (customer-barcoded pooled amplicons 1-5 kb)

Services Quantity Prices
Sample QC 1 $75.27
SMRTbell Library Prep 1 $644.69
Sequel II 8M SMRT Cell with Short Movie 1 $2,084.37
CCS Data Analysis (per SMRT Cell 8M) 1 $309.35
Total $3,113.68

Iso-Seq whole transcriptome (3 pooled tissues targeting 500k reads per tissue)

Services Quantity Prices
Sample QC 3 $225.81
cDNA Generation 3 $594.90
SMRTbell Library Prep 1 $644.69
Sequel II 8M SMRT Cell with Long Movie 1 $2,322.09
CCS Data Analysis (per SMRT Cell 8M) 1 $309.35
Iso-Seq transcript analysis 1 Included
Total $4,096.84

  1. If you are unsure which services you require, contact us for a consultation and a quote.Please indicate your organism of interest, genome size or amplicon length, and desired coverage if known.
  2. Fill out the sequencing request form , selecting DNA or Iso-Seq service, and include a purchase order (PO) number, fund code, or budget number. For external requests, we accept money order, VISA, and MasterCard payments.
  3. Email the completed form to us at
  4. Prepare your samples and optionally prepare SMRTbell libraries for sequencing.
  5. Wait for an estimate of cost form to be issued via email, sign it, and return to us.
  6. Ship your samples as directed below.
  7. Await email confirmation from us that your samples have arrived.
  8. Await a sequencing report that will include details regarding how to download your sequence data.

Raw sequence data for your samples will be stored in PacBio's bam file format. You will be able to download these files using Globus. Credentials will be securely shared with you via Globus upon completion of your sequencing and analysis. Data and analysis from sequencing runs will be available through Globus for 30 days and raw data will be backed up on our local storage for six months, after which it will be permanently deleted.

Sample Guidelines

SMRT sequencing does not require template amplification. DNA quality will affect the resulting library and sequencing results. It is imperative that the DNA used is at high quality and sufficient quantity since there is no amplification step.

Follow these guidelines for sample preparation:

  • The sample should be double stranded. Double-stranded DNA is required to make a SMRTbell template and single-stranded templates will interfere with quantitation and polymerase binding.
  • Eluted in Qiagen Elution Buffer (EB) or similar buffered solution (10 mM Tris at neutral pH).
  • Avoid freeze-thaw cycles.
  • Do not expose to high temperatures (>65°C) for 1 hour. This may degrade the overall DNA quality and subsequent library prep quality.
  • Has not been exposed to pH extremes (<6 or >9).
  • Make sure it does not contain insoluble material and is not colored or cloudy.
  • It does not contain RNA.
  • It has not been exposed to intercalating fluorescent dyes or UV radiation.
  • It does not contain chelating agents (e.g., EDTA), divalent metal cations (like Mg 2+), denaturants (like guanidinium salts, phenol), or detergents (like SDS, Triton-X100).
  • It should not contain carryover contamination from the starting organism/tissue (e.g., heme, humic acid, polyphenols, polysaccharides, etc.).
  • If submitting PCR products, use Qiagen kits for clean-up.

Other recommendations include:

  • PacBio has released a list of DNA extraction protocols from published papers using PacBio sequencing:
  • PacBio recommends ‘MasterPure Complete DNA and RNA Purification Kit’ (Lucigen) and Circulomics Nanobind CBB Big DNA Kit for High Molecular Weight (HMW) DNA extraction and purification. We also have had success with Qiagen or similar extraction kits for shorter fragment applications. Make sure to elute in 10mM Tris instead of water.
  • Avoid vortexing where possible and use wide bore tips for pipetting. Higher concentrations of DNA help protect against shearing during routine handling.
  • If performing AMPure bead washes, use very gentle (end-over-end) mixing and allow extra time for binding and elution. Elution may be assisted by short (~10 minute) incubations at 37°C.
  • Tips for microbial DNA extraction:
    • Avoid incubation in complex or rich media.
    • Harvesting from several cultures rather than a single, high-density culture during early- to mid-logarithmic growth phase is preferred.
    • Extraction of small volumes is preferred over large volumes to avoid accumulating high concentrations of potentially inhibiting secondary components.
  • Check for OD260/OD280 ratio between 1.8 and 2.0.
  • Check for OD260/OD230 ratio between 2.0 and 2.2.
  • Use low bind microcentrifuge tubes whenever possible.
  • Run a standard or pulse field gel, BioAnalyzer, or TapeStation to visualize DNA quality. If sample looks degraded, re-extract the sample or plan for shorter read lengths.

If using AMPure beads, make sure there are no residual beads with the samples. This will inhibit any enzymes used in the subsequent process. It will especially affect polymerase binding critical for quality sequencing reads.

Recommended DNA clean-up

PacBio recommends using a high salt phenol/chloroform wash to remove polysaccharides from high molecular weight DNA. Polysaccharides are a common source of poor sequencing results, especially for fungal or plant samples. An alternative recommended kit is the PowerClean® DNA Clean-Up Kit to remove residual gDNA isolation reagents that may inhibit the polymerase binding essential for successful sequencing. The kit removes heme, polysaccharides, phenols, and dyes.

Submitting Barcoded Pools

If you are barcoding amplicons before sending, PacBio’s recommended barcodes can be found here. All pooling must be performed prior to submission.

Library Guidelines

In addition to the sample preparation guidelines above, library preparations also require the following:

  • Store in a stable environment; avoid freeze-thaw cycles, which will decrease library quality.
  • Ship on gel packs or in dry ice with legible water/cold proof labels.
  • Perform a BioAnalyzer or gel assay to see target library range and overall quality.

Sample Submission

Please reference the tables below for DNA mass submission requirements. Ship DNA samples at 4°C or frozen on dry ice. Do not submit DNA at room temperature as this may affect DNA quality. If using a UV absorbance quantitation method (i.e., Nanodrop or OD260), please submit more material as these methods tend to read up to 2x higher than fluorometric quantitation methods.

Library Type/Insert Size Amount of DNA Required Input DNA sizing
Amplicon 0.5-3 kb 500 ng 500-3000 bp
Amplicon 5-15 kb 1 µg 5-15 kb
HiFi Library 15-20 kb 10-12 µg gDNA mode >20 kb
Genome 8-20 kb 3-5 µg gDNA mode >20 kb
Large Insert Size-Selected Genomes (20 kb+) 5-8 µg gDNA mode >50 kb

Multiplex Library Type/Insert Size Amount of DNA Required
Multiplexed Amplicons 0.5-3 kb 500 ng per pool(minimum 50 ng per sample)
Multiplexed Amplicons 5-15 kb 1.5 µg total per pool (minimum 200 ng per sample)
Multiplexed HiFi Libraries 5-15 kb 2 µg per sample for pools of 4 or more
Multiplexed Small Genomes 8-15 kb 2 µg per sample for pools 4 or more

For Iso-Seq library preps, submit the following amounts of RNA on dry ice. Do not submit RNA at room temperature. This may affect RNA quality. Submitted RNA should have a RIN score of at least 7.5.

RNA Type Amount of RNA Required
Total RNA 1-2 µg

Library Submission

Follow the PacBio Standard Library prep protocol when constructing libraries for submission. Any deviation may result in a poor sequencing run.

Make sure the final concentration is ~20-100 ng/µL at 15-200 µL volume (adjusting for required amount of DNA). Any less may result in a poor run or poor overall representation of template sequence.

Shipping Samples

Ship your samples to the following address using standard shipping protocols for DNA:

UW PacBio Sequencing Services
c/o Katherine Munson
Box 355065
3720 15th Ave NE, S413A
Seattle, WA  98195-5065
Work +1-206-616-5117
Do not ship samples at room temperature. Please plan for weekday delivery only. Put your sample tubes into a sturdy secondary container such as a 50 mL conical tube or plastic box. Please contact us for recommendations on international shipping.
Demultiplexing of raw data, assembly of microbial genomes, CCS analysis for amplicons or HiFi data, and the Iso-Seq 3.0 pipeline are all available upon request. We do not offer de novo assembly for large genomes.

Downloading Data

When your sequences are ready, your data will be released using Globus and available for download for 30 days. Globus is a service provider that manages login credentials and coordinates transfers between organizations. If you are new to Globus, you will need to login to Globus before we can assign access permissions. You can sign in with institutional, Google, or ORCiD credentials. Please see the getting started step-by-step guide. If you'd like to test connectivity and throughput, you can access the UWGS Demo Endpoint #1 at UWGS Demo Endpoint #1. Read-only access is open to all Globus users. Please ask the individuals who will transfer data to login to Globus indicate the email addresses associated with their Globus login on the sequencing request form. We will email a link to the appropriate data share to those individuals. Please notify us if access for any individuals should be changed. Data are grouped into folders by SMRT cell. Folders are named by the unique identifiers you supply for each sample. For each SMRT cell we provide a tarball (tar.gz archive) containing the entire raw data output folder, including all information required for de novo assembly. Please see this table for the full contents of the tarball (tar.gz archive), which includes

  1. Raw reads in PacBio's BAM (subreads.bam) format.
  2. All associated metadata files required for import of data into PacBio's SMRT Link software.

For sequencing projects where we provide additional secondary analyses, we will include a pdf report and the final output files for the specific analysis with all FASTQ and FASTA files compressed by gzip. SMRT Link, a GUI tool for analysis of raw PacBio reads, is available for download including the SMRT Analysis toolkit, which can perform de novo assembly and resequencing. PacBio also provides the latest pre-release versions of individual tools for command line use through Bioconda.